ReadyMadeRC
HERO3: BLACK EDITION
| Weighing in at a scant 2.6 ounces, the HERO3 | Black Edition is 25% lighter and 30% smaller than previous models. |
The Wi-Fi enabled HERO3: Black Edition is the most advanced GoPro, ever. No expense was spared during its development, resulting in a GoPro that is 30% smaller, 25% lighter and 2x more powerful than previous models. Wearable and gear mountable, waterproof to 197' (60m), capable of capturing ultra-wide 1440p 48fps, 1080p 60 fps and 720p 120 fps video and 12MP photos at a rate of 30 photos per second, the HERO3: Black Edition is the world's most versatile camera. Built-in Wi-Fi, GoPro App compatibility and the included Wi-Fi Remote (normally a separate $79.99 accessory) make the HERO3: Black Edition all the more versatile, still., The HERO3: Black Edition captures professional, cinema-quality video at 2X the resolution and 2X the frame-rate of previous models while delivering 2X better low light performance. Slow-motion aficionados and industry professionals will love the HERO3: Black Edition's 1080p-60, 720p-120, WVGA-240, 960p-100 and 1440p-48 video modes while those desiring a cinematic look will appreciate the ultra-high resolution 2.7KP-30 fps and 4KP-15 fps (Protune only) video modes., The HERO3: Black Edition's photo performance is 3X improved, now boasting 12MP burst capture at a staggering 30 frames per second with 2X better low light performance compared to previous models. Still Photo and Time-lapse Photo modes remain the same but are now joined by a new Continuous Photo mode that captures continuous 12MP stills at a steady 3, 5, or 10 photo-per-second rate, up to 30 photos at a time., The HERO3 Black Edition features built-in Wi-Fi and includes GoPro's Wi-Fi Remote accessory. The Wi-Fi Remote is normally available as a $79.99 accessory but is included with the HERO3: Black Edition. The Wi-Fi Remote is waterproof, wearable and can control up to 50 Wi-Fi-enabled GoPros at a time from a range of 600'. The HERO3's built in Wi-Fi means it can also be controlled by iOS smartphones and tablets running ,
Includes free 16GB class 10 micro SD card!!! Smaller, lighter ...ReadyMadeRC
SIMPLEOSD X2
Features:, , Documents:, , Requirements:, , Loading the DIY-OSD Firmware:,
Latest version of legendary SimpleOSD. SimpleOSD X2 edition is the ...ReadyMadeRC
CELLPRO POWERLAB 8 V2 WITH EC5 INPUT CABLE, 1344W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
For Battery types:, Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 10s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 60A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 60A input current*, Output battery discharge current:, Internal discharge 10mA to 10A, 100W max Regenerative discharge 10mA to 40A, 1344W max**, Continuous max output power:, 612W @ +12VDC input, 1344W @ +26.35VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Twin, 13 CFM, 50mm diameter, Heat sink:, Internal 200W aluminum, thin finned, Output battery connector:, “Cellpro” compatible, JST PA series, 9 position, LCD:, 2 line, 16 character, light grey/blue backlit, Size:, 5.82" x 6.55" x 3.57", Footnotes:, *,
UNLEASH THE POWER! The industry's first 1344W Battery Workstation now ...ReadyMadeRC
CELLPRO POWERLAB 6 V2 WITH EC5 INPUT CABLE, 1000W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
More on the PowerLab Philosophy:, Power is important, but means little without other key features of SAFETY,RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION; the key elements that are painstakingly crafted into the Cellpro product line. The competition will come along with powerful chargers after we lead, but they will have trouble harnessing this power., SPECFIFICATIONS:, For Battery types:, Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 40A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 40A input current*, Output battery discharge current:, Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**, Continuous max output power:, 408W @ +12VDC input, 1000W @ +30VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Single, 13 CFM, 50mm diameter, Heat sink:, Internal 120W,
POWER Welcome to PowerLab 6, the second offering in the ...